Game Pak: Front
Game Pak: Front
Game Pak: Back
Game Pak: Back
PCB: Front
PCB: Front
PCB: Back
PCB: Back

All Trademarks are (c) their respective owners.
All scans are "owned" by The Cart Scan Repository, if you want to use them, please ask us.

Nintense; The Corporation.
WT_Riker; Obsidian.

Game: The Legend of Zelda:
Ocarina of Time v1.2
Game Pak (Front): NUS-006 (-01)(USA)
NUS-CZLE-USA
Game Pak (Back): NUS-USA/CAN-1
ROM Chip: C985297-M
MX23L25602-35A
NUS-CZLE-2
2B25140000
CIC Chip: (c) 96-98 Nintendo
CIC-NUS-6105
9850 E
PCB Label: (c) 1997 Nintendo
NUS-03A-01
Save Chip: LH52V246AD
SHARP JAPAN
9852 7 SC
Other Chips: ?8CA32FM
74LV2416
Other Features: 7 Resistors
1 Capacitor
1 CS2032 Battery
WT nfo: Interesting to see the half size SRAM chip, similar to the "Flash" Chips. It must be cheaper to produce the smaller version than the older large chip. And Also note N not only cuts cost by using smaller chips, they use the same gold label from the Gold Cart Zelda. I mean, come on... surely it should be grey for the grey cart. ;)
Nintense nfo: Quite a few things of interest when comparing this cart to the gold v1.0 edition of Zelda. First off is the id on the label, this version having the CZLE id, compared to the CZGE of the gold version. This cart also seems to have the Texas Instruments logo on the "other" chip, that's what the ? above appears to be. Also interesting is the sram chip in this version of Zelda. It is much smaller than your typical sram chip, looking more like a flash ram chip. It is about half the size of the Zelda v1.0 cart. Guess they change more than the code with each revision eh?